WATER JETTING by GARDNER DENVER
  • SWAG STORE
  • Pumps & Packages 800-580-JETT
    Parts & Accessories 800-580-FLOW

T-300 Bareshaft Waterjetting Pumps

Compact, Powerful and Cost Efficient Water Jetting Pumps - Pressures to 40,000 PSI, Flows to 18 GPM, Power to 100 HP

The Gardner Denver "T Series" triplex bareshaft water jetting pumps have been in production for over 30 years and still going strong. You will find these reliable little pumps on the 100 Series Units. They are an ideal, economical "first pump" for most contractors.
T-300M for 15,000 PSI - The T-300M features the "L" fluid end design, which performs at pressures from 8,000 to 15,000 PSI, and flows from 10.3 to 18.4 GPM. Four different plunger sizes allow this pump to adapt to the specific flow and pressure requirements for each job.
T-300H for 20,000 PSI - The T-300H inline fluid end reliably covers the pressure range from 15,000 to 20,000. Depending on the plunger set installed, the T-300H will deliver flows from 7.7 GPM to 10.3 GPM. All fluid cylinders and valve assemblies are autofrettaged for durability.
T-300UH for 40,000 PSI - The T-300UH inline fluid end reliably covers the pressure range to 40,000 and will deliver flows from 1.3 GPM to 4.0 GPM depending on the RPMs. All fluid cylinders and valve assemblies are autofrettaged for durability.

T-300H_prod
Performance
Design
Brochure
Associated Equipment
Get a Quote
Performance

RPM

200  RPM

200 RPM

400  RPM

400 RPM

600  RPM

600 RPM

MODEL

MAWP PSI

MAWP Bar

Plunger In.

Plunger mm

FLOW GPM

FLOW LPM

FLOW GPM

FLOW LPM

FLOW GPM

FLOW LPM

T-300M

15,000

1034

0.750

19

3.4

12.9

6.8

25.9

10.3

39.0

T-300M

11,500

793

0.875

22

4.7

17.8

9.4

35.6

14.1

53.0

T-300M

10,000

690

0.945

24

5.5

21.0

10.9

41.0

16.4

62.0

T-300M

8,000

552

1.000

25

6.1

23.1

12.2

46.2

18.4

69.6

T-300H

20,000

1379

0.650

17

2.6

9.8

5.1

19.5

7.7

29.3

T-300UH

40,000

2758

0.472

12

1.3

4.92

2.7

10.2

4.0

15.1

Design

Design Advantages

  • High volumetric efficiency for maximum horsepower;
  • Maximum frame load of 7,000 lbs./3178 Kg;
  • Field proven design;
  • Extremely reliable - thousands in service in a wide variety of environments world wide.world wide;
  • Easy field maintenance with common tools;
  • Rigorously subjected to full load testing;
  • Available with all stainless steel fluid ends;
  • Suction manifold is available in hard, anodized aluminum or stainless steel;
  • Discharge manifold is manufactured from precipitation hardened stainless steel;
  • Plungers and packing easily replaced from the rear of the stuffing box;
  • Force-fed water provides lubrication and cooling;
  • Crankshaft made from double extended cast alloy steel with tapered roller bearings to minimize side thrust load;
  • Bearings and crossheads are oil lubricated with a combined splash gravity system that insures adequate circulation at speeds as low as 200 RPM.
Associated Equipment
control guns, hoses, pressure gauge, fittings, rupture disc holders, pressure relief valves, PRV, automatic throttle control, whip checks
Get a Quote