Return to the product list

Bare Shaft Pumps

100 HP - T-300 Pumps

Compact, Powerful and Cost Efficient Water Jetting Pumps - Pressures to 40,000 PSI, Flows to 18 GPM, Power to 100 HP

The Gardner Denver "T Series" triplex bareshaft water jetting pumps have been in production for over 30 years and still going strong. You will find these reliable little pumps on the 100 Series Units. They are an ideal, economical "first pump" for most contractors.

This pump is available in both right hand or left hand or even double shafted drive. This pump is now rated for 150 HP, making it the highest horsepower with the smallest footprint.

The T-300SB for high-flow applications features the "L" fluid end design, which performs at pressures from 2,900 at 56.2 GPM to 5,700 PSI, at 28.7 GPM. It has soft seated inserted valves for durability and capacity to run “dirty” water. Valve locations are easily accessible and plungers are the quick change stile to change from 28 GPM to nearly 60 GPM in minutes.

T-300M for 15,000 PSI -The T-300M features the "L" fluid end design, which performs at pressures from 8,000 to 15,000 PSI, and flows from 10.3 to 18.4 GPM. Four different plunger sizes allow this pump to adapt to the specific flow and pressure requirements for each job. This pump is the standard for waterblasting. It covers the standard range of pressures and flows for a 100 HP pump. Overall maintenance and parts are inexpensive to maintain. Keep operating costs down with this Gardner Denver high-pressure waterjetting pump.

T-300H for 20,000 PSI - The T-300H inline fluid end reliably covers the pressure range from 15,000 to 20,000. Depending on the plunger set installed, the T-300H will deliver flows from 7.7 GPM to 10.3 GPM. All fluid cylinders and valve assemblies are autofrettaged for durability.

T-300UH for 40,000 PSI - The T-300UH inline fluid end reliably covers the pressure range to 40,000 and will deliver flows from 1.3 GPM to 3.75 GPM depending on the RPMs. All fluid cylinders and valve assemblies are autofrettaged for durability.

T-300 Plunger Options

Model

PSI

Bar

Plunger In.

Plunger mm

Flow

T-300SB

2,900

200

1 3/4"

45

56.2

T-300SB

5,700

393

1 1/4"

32

28.7

T-300M

8,000

552

1"

25

18.4

T-300M

10,000

690

.945"

24.0

16.4

T-300M

11,500

793

7/8"

22

14.1

T-300M

15,000

1034

3/4"

19

10.3

T-300H

15,000

1034

3/4"

19

10.3

T-300H

20,000

1956

0.65

16.5

7.7

T-300UH

40,000

2758

0.47[DM1]

12

3.75

  • High volumetric efficiency for maximum horsepower
  • Maximum frame load of 7,000 lbs/3178 kg
  • Field-proven design
  • Extremely reliable - thousands in service in a wide variety of environments worldwide
  • Easy field maintenance with common tools Rigorously subjected to full load testing
  • Available with all stainless steel fluid ends
  • Suction manifold is available in hard, anodized aluminum or stainless steel
  • Discharge manifold is manufactured from precipitation hardened stainless steel
  • Quick Change Plungers offered on the T-300SB and T-300HX models
  • Soft Seated valve on the 20,000PSI T-300HX and T-300SB
T-300H Pump
T-300M Pump
T-300UH Pump
300 HP - TY-375 Pumps
Learn More
330 HP - TF-450 Pumps
Learn More
450 HP - TX-450 Pumps
Learn More
600 HP - QF-450 Pumps
Learn More